FIBER LASER MACHINES

LASER CUTTING MACHINES

SUPERA-F FIBER LASER CUTTING MACHINE

DERATECH SUPERA-F Fiber Laser

It is designed to offer high dynamics during high-speed cutting of thin materials while having all the technology and know-how on board to produce stable and consistent parts in thicker material, where the maximum thickness is only limited by the output power of the laser. The machine can cut the sheets on two different height levels inside the machine, this allows the automatic shuttle table system to change very fast between tables since the tables do not need to make any vertical movement. The fully covered machine assures a perfectly eye-safe operation.

FIBER LASER SOURCE

The Supera can be equipped with MAX or IPG source, from 1 – 12kW

 

Features:

 

Bridge Structure

Central in the design of the machine is the light-weight bridge which has been optimized to have extreme high stiffness and allows the machine to reach very high dynamics without compromising the accuracy of the parts over the entire 1.5m span of the width of the working range

Suction Unit

The working area under the cutting table of the Supera 3015 is divided into separate sections from where dust and smoke can be extracted efficiently.

Transmission System

Powerful low-inertia servo motors with gear-box provide the necessary torque to the high-precision rack and pinion drive system.

Cutting Head

The Supera 3015 is equipped with a light-weight and robust cutting head from RAYCUS for fiber-delivered laser sources (fiber laser, disk laser, or direct diode laser) of maximum 16kW output power.

Fiber Laser Source

The Supera can be equipped with MAX or IPG source, from 1 – 12kW

Motion

Servo motors and drives by Yaskawa.

Control System

A powerful CNC lies at the heart of the Supera laser cutting performance. This allows extreme fast processing of all tasks and introduces virtually no dead-times in the production.

Shuttle Table

The operation of the shuttle table is full-automatic and completely integrated with the safety light curtain system around it to protect the operator.

 

SUPERA CS FIBER LASER CUTTING MACHINE

The Supera is a double-drive gantry type flying optics laser cutting machine. It has high dynamics during high-speed cutting of thin materials. Having all the technology and know-how on board to produce stable and consistent parts in thicker material.

Features

  • The machine has a robust and rigid design that guarantees repeatable high precision cutting results
  • Both the working tables move in and out of the machine simultaneously, decreasing dramatically the time of the table change cycle and increasing the productivity of the machine. New sheets get faster in and cut sheets get faster out of the machine.
  • The machine features a completely closed cabin and offers safe and ergonomic operation. The large eye-safe windows allow an optimal overview of the entire working area of the machine.
  • The light-weight aluminium bridge assures accurate cutting results even under high-dynamic axis movements.
  • A long vertical stroke of the cutting head gives additional freedom in the cutting application: pre-formed sheets, tubes, profiles, etc. can easily be put on the cutting table and are in reach of the cutting head.
  • The machine layout is symmetric when it comes to the maintenance access from the sides: either side can be put close to a wall while having all the necessary reach to maintenance points on the opposite side.

Laser source

Famous IPG Laser source is with high performance, long stability.
More than 100000 hours work-life of pumped diode
Wide range of operating wavelengths, single-mode and multi-mode options

Cutting Head 

Manual or Auto-focus is for your option, the manual autofocus head equipped for fiber-delivered laser sources of maximum 2kW output power.
More than high power higher power lasers (>2kW), the fully automatic focus cutting head is recommended.

Shuttle table 

Full-automatic and completely integrated with the safety light curtain system to protect the operator
The cycle time is extremely fast because the tables are not moving vertically at any time.
The cutting tables come into the machine at different heights, well within reach of the long Z-axis stroke.

Suction unit 

With improved suction system for fumes and smokes, scrap pieces and heavy dust fall through the cutting tables into separate boxes that can easily be taken away from the side of the machine.

Application:

Available for cutting such metal sheet as stainless steel, carbon steel, copper, brass, alloy steel, aluminum, gold, silver, titanium and so on.
Widely used in the sheet metal processing, shipbuilding, automobile, rail transportation, agriculture machinery, advertising board ,kitchen utensils, machinery, elevator and so on.

WRITE TO US

For general enquiries or to arrange a quote please feel free to call us, email us. We meet all your requirements for SHEETMETAL products and services all across Australia.

We appreciate your feedback, so feel free to contact us about any issues you would like to alert us to, by telephoning  (03) 9796 5260  or use the form below to send us an e-mail:

8 + 6 =

TALK TO US

To receive this offer contact us about any issues you would like to alert us to, by telephoning (03) 9796 5260  or use the form below to send us an e-mail:

2 + 12 =